Valves / Tubes
217 ads
-
Tung-Sol KT 120 x 4 Valves/Tubes
By craka
KT 120 valves x 4. I purchased these as low hour spares for one of my Amps. I put a an hour or so on them to check they were working well. I really enjoy the sound of the Tungsol KT120,s. Much better Bass, with improved grip throughout the lows and highs compared to KT88,s-
Price: AUD $220
-
Condition: Very Good
-
Region/State: (QLD) Queensland/Australia
-
Payment Method: EFT Cash on pickup
0 comments
Updated
-
-
Philips Miniwatt 6201 (12AT7 E81CC ECC801) Valves/Tubes
By dwbasement
Philips miniwatt 6201 (12at7, e81cc) special quality gold pins, this one is the rare pinched waist type. I have used only to make sure it is working. I do not have a tester to confirm value but it was bought as tested like new. Pick up available from Ultimo NSW2007 office hours or Lindfield NSW2070 after hours. Postage $15 flat insured or $10 uninsured with tracking.-
Price: AUD $128
-
Condition: Excellent
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Paypal f&f COP, PayID
-
Time Left: 2 days and 12 hours
0 comments
Submitted
-
-
Mullard E80CC Valves/Tubes
By Ed369
Mullard E80CC / 12au7 equivalent but more gain. minimum hours or new I can’t remember.-
Price: AUD $80
-
Condition: Excellent
-
Region/State: (WA) Western Australia/Australia
-
Payment Method: Any
-
Time Left: 2 days and 8 hours
0 comments
Submitted
-
-
Tung-Sol KT150 Valves/Tubes
By Scotsgrey
Purchased these end of last year on this forum from smart in WA just to scratch an itch in trying them out in my Opera Consonance amplifier (also listed for sale). I’ve put genuine 3hrs on them and they’re immaculate. Consolidating my setup and they’re just sitting in my drawer. Happy to ship (safely).-
Price: AUD $420
-
Condition: As New / Mint
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: EFT, Cash, Paypal +3%
0 comments
Submitted
-
-
Linlai E-300B matched pair Valves/Tubes
By option-up
Linlai Elite 300B tubes - matched pair Top of the Linlai range for 300B tubes, and a very fine improvement over the stock Electroharmonix tubes that come with many 300B amplifiers (including mine). Purchased from eBay seller frankleeeb in late Nov 2023. They were brand new (unused) according to the listing. These are not the Linlai Global branded tubes, but the "domestic market" chinese script branded ones. There's debate about whether the two are actually the same intern-
Price: AUD $500
-
Condition: Very Good
-
Region/State: (VIC) Victoria/Australia
-
Payment Method: Paypal, EFT, Cash on pickup
0 comments
Submitted
-
-
EXPIRED PSVANE CV181-T Mark II (single) Valves/Tubes
By option-up
PSVANE CV181-T Mark II (6SN7) single tube This is a direct replacement for a 6SN7 tube. I bought this new from Viva Tubes in Nov 2023. Low use (approx 47 hours). Linlai E-6SN7 sounds better to me, so I'm letting this one go. Happy to post.-
Price: AUD $75
-
Condition: Very Good
-
Region/State: (VIC) Victoria/Australia
-
Payment Method: PayPal, EFT, Cash on pickup
0 comments
Submitted
-
-
EXPIRED ELROG ER300B Valves/Tubes
I've had these fantastic tubes sitting ready for a Supratek preamp, but have gone a different (darTZeel) direction for the preamp instead. They should head to another home, in other words. They're in lovely condition. I'm the second owner. 1–200 hours on them. I'm NZ-based (Nelson), but happy to ship elsewhere at the buyer’s cost.-
Price: NZD $1,400
-
Condition: Excellent
-
Region/State: (NS) South Island/New Zealand
-
Payment Method: Bank transfer or cash on collection
0 comments
Updated
-
-
EXPIRED Philips Miniwatt 6201 (12AT7 E81CC ECC801) Valves/Tubes
By dwbasement
Philips miniwatt 6201 (12at7, e81cc) special quality gold pins, this one is the rare pinched waist type. I have used only to make sure it is working. I do not have a tester to confirm value but it was bought as tested like new. Pick up available from Ultimo NSW2007 office hours or Lindfield NSW2070 after hours. Postage $15 flat insured or $10 uninsured with tracking.-
Price: AUD $128
-
Condition: Excellent
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Paypal f&f COP, PayID
0 comments
Submitted
-
-
EXPIRED Mullard E80CC Valves/Tubes
By Ed369
Mullard E80CC / 12au7 equivalent but more gain. minimum hours or new I can’t remember.-
Price: AUD $80
-
Condition: Excellent
-
Region/State: (WA) Western Australia/Australia
-
Payment Method: Any
0 comments
Submitted
-
-
EXPIRED PSVANE CV181-T Mark II (single) Valves/Tubes
By option-up
PSVANE CV181-T Mark II (6SN7) single tube This is a direct replacement for a 6SN7 tube. I bought this new from Viva Tubes in Nov 2023. Low use (approx 47 hours). Linlai E-6SN7 sounds better to me, so I'm letting this one go. Happy to post.-
Price: AUD $100
-
Condition: Very Good
-
Region/State: (VIC) Victoria/Australia
-
Payment Method: PayPal, EFT, Cash on pickup
0 comments
Submitted
-
-
EXPIRED Linlai E-300B matched pair Valves/Tubes
By option-up
Linlai Elite 300B tubes - matched pair Top of the Linlai range for 300B tubes, and a very fine improvement over the stock Electroharmonix tubes that come with many 300B amplifiers (including mine). Purchased from eBay seller frankleeeb in late Nov 2023. They were brand new (unused) according to the listing. These are not the Linlai Global branded tubes, but the "domestic market" chinese script branded ones. There's debate about whether the two are actually the same intern-
Price: AUD $600
-
Condition: Very Good
-
Region/State: (VIC) Victoria/Australia
-
Payment Method: Paypal, EFT, Cash on pickup
0 comments
Submitted
-
-
EXPIRED Mullard E80CC Valves/Tubes
By Ed369
Mullard E80CC / 12au7 equivalent but more gain. minimum hours or new I can’t remember.-
Price: AUD $80
-
Condition: Excellent
-
Region/State: (WA) Western Australia/Australia
-
Payment Method: Any
0 comments
Submitted
-
-
EXPIRED ELROG ER300B Valves/Tubes
I've had these fantastic tubes sitting ready for a Supratek preamp, but have gone a different (darTZeel) direction for the preamp instead. They should head to another home, in other words. They're in lovely condition. I'm the second owner. I'm normally NZ-based (Nelson), but will be in Melbourne and Adelaide this week if anyone wants an easy face to face deal, or shipping from within Australia.-
Price: AUD $1,600
-
Condition: Excellent
-
Region/State: (SA) South Australia/Australia
-
Payment Method: Paypal, EFT or cash on collection
0 comments
Submitted
-
-
EXPIRED Philips Miniwatt 6201 (12AT7 E81CC ECC801) Valves/Tubes
By dwbasement
Philips miniwatt 6201 (12at7, e81cc) special quality gold pins, this one is the rare pinched waist type. I have used only to make sure it is working. I do not have a tester to confirm value but it was bought as tested like new. Pick up available from Ultimo NSW2007 office hours or Lindfield NSW2070 after hours. Postage $15 flat insured or $10 uninsured with tracking.-
Price: AUD $128
-
Condition: Excellent
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Paypal f&f COP, PayID
0 comments
Submitted
-
-
EXPIRED Mullard E80CC Valves/Tubes
By Ed369
Mullard E80CC / 12au7 equivalent but more gain. minimum hours or new I can’t remember.-
Price: AUD $80
-
Condition: Excellent
-
Region/State: (WA) Western Australia/Australia
-
Payment Method: Any
0 comments
Submitted
-
-
EXPIRED GEC U52 Valves/Tubes
By missmurphy
1950s brown base GEC u52 rectifier, d getter black plates i bought this as a replacement for my stereo 20 valve amp , and I must say that it is the best tube I have heard in that position! It hands down beats the metal base gz34 and f31 fat base, but it should not really see that size of a first cap, it probably wouldn’t bother it in reality as I have used a gz37 for 10 years in a leak 20 but I’m building a pair of monos and need two different tubes so this can be sold if you have-
Price: AUD $400
-
Condition: Good
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Cash / eft
0 comments
Submitted
-
-
Philips E88CC SQ Valves/Tubes
By 50hz hum
Strong testing Philips E88cc special quality gold pin made in Holland matched pair. Unfortunately they did not pair with my headphone rig and have been sitting in the drawer for several years. I would have only used these for a handful (<10) hours. I’ve recently tested in the tube stage of my DAC and these sound wonderful also put them on my tester to assure me they are still in excellent condition. Due to recent “investments” to my setup, the wife has “suggested” that maybe it’s time I sell-
Price: AUD $185
-
Condition: Excellent
-
Region/State: (QLD) Queensland/Australia
-
Payment Method: PayPal, EFT, Cash on pickup
0 comments
Submitted
-
-
EXPIRED Philips Miniwatt 6201 (12AT7 E81CC ECC801) Valves/Tubes
By dwbasement
Philips miniwatt 6201 (12at7, e81cc) special quality gold pins, this one is the rare pinched waist type. I have used only to make sure it is working. I do not have a tester to confirm value but it was bought as tested like new. Pick up available from Ultimo NSW2007 office hours or Lindfield NSW2070 after hours. Postage $15 flat insured or $10 uninsured with tracking.-
Price: AUD $128
-
Condition: Excellent
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Paypal f&f COP, PayID
0 comments
Submitted
-
-
EXPIRED PSVANE CV-181 Mk2 “Gold” (6SN7) Valves/Tubes
By Dystoria
Up for grabs is a matched pair of PSVane CV-181 Mk2 “Gold” (6SN7) driver tubes. These shipped as a matched pair with a Felix Euforia Evo Headphone Amp, purchased December 2023 from Addicted to Audio. I swapped them out for Linlai E 6SN7s mid Jan 2024. They have no more than 20hours on them and are not broken in. I have the receipt for the Euforia Evo (which is the date the PSVanes were purchased) and I can provide the link to the SNA seller I purchased the Linlai's from-
Price: AUD $210
-
Condition: As New / Mint
-
Region/State: (VIC) Victoria/Australia
-
Payment Method: EFT, Cash on Pickup
0 comments
Submitted
-
-
GEC KT66 Valves/Tubes
By Abarth
GEC KT66 BRITISH MADE MATCHED PAIR OF USED OLD STOCK TESTED 100% STRONG IN BOX VINTAGE VALVES TUBES. MADE BY THE GEC MARCONI OSRAM MO VALVE CO. LTD. HAMMERSMITH LONDON GREAT BRITAIN. BROWN BASES WITH CLEAN SHINY METAL PINS. DOUBLE OO SHAPED LOWER GETTERS. THE FACTORY CODES IN WHITE PRINT ON THE BACK OF THE TUBES ARE WORN A BIT IN PLACES. GEC KT66 VINTAGE BOXES AND ORIGINAL CARDBOARD PACKING. MADE IN ENGLAND. THESE VALVES TESTS AS 100% STRONG-
Price: AUD $500
-
Condition: Very Good
-
Region/State: (NI) North Island/New Zealand
-
Payment Method: PAYPAL OR EFT
0 comments
Submitted
-
-
EXPIRED Tung-Sol KT 150 Valves/Tubes
By Smudger 14
I have for sale a matched set of 9 KT150 valves with minimal usage. The valves were supplied as a set with my Prima Luna dialogue premium amplifier. Only installed one=ce for around 15 hours of listening time. I have upgraded to Macintosh 352 amp so longer require these items.-
Price: AUD $1,000
-
Condition: Excellent
-
Region/State: (WA) Western Australia/Australia
-
Payment Method: Cash, Bank transfer
Submitted
-
-
EXPIRED Mullard E80CC Valves/Tubes
By Ed369
Mullard E80CC / 12au7 equivalent but more gain. minimum hours or new I can’t remember.-
Price: AUD $80
-
Condition: Excellent
-
Region/State: (WA) Western Australia/Australia
-
Payment Method: Any
0 comments
Submitted
-
-
Western Electric WE396A Valves/Tubes
By Cacofonix
For sale- one WE396A with 47hrs use logged in a Schiit Vali 3. First quarter 1968 production date, square getter. Purchased from Radio Electric Supply, Florida. Auswide postage capped at $10.-
Price: AUD $90
-
Condition: As New / Mint
-
Region/State: (WA) Western Australia/Australia
-
Payment Method: EFT/Payid, PayPal, Cash on Pickup/Delivery
Submitted
-
-
EXPIRED GEC U52 Valves/Tubes
By missmurphy
1950s brown base GEC u52 rectifier, d getter black plates i bought this as a replacement for my stereo 20 valve amp , and I must say that it is the best tube I have heard in that position! It hands down beats the metal base gz34 and f31 fat base, but it should not really see that size of a first cap, it probably wouldn’t bother it in reality as I have used a gz37 for 10 years in a leak 20 but I’m building a pair of monos and need two different tubes so this can be sold if you have-
Price: AUD $400
-
Condition: Good
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Cash / eft
0 comments
Submitted
-
-
EXPIRED Philips Miniwatt 6201 (12AT7 E81CC ECC801) Valves/Tubes
By dwbasement
Philips miniwatt 6201 (12at7, e81cc) special quality gold pins, this one is the rare pinched waist type. I have used only to make sure it is working. I do not have a tester to confirm value but it was bought as tested like new. Pick up available from Ultimo NSW2007 office hours or Lindfield NSW2070 after hours. Postage $15 flat insured or $10 uninsured with tracking.-
Price: AUD $128
-
Condition: Excellent
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Paypal f&f COP, PayID
0 comments
Submitted
-
-
EXPIRED Mullard E80CC Valves/Tubes
By Ed369
Mullard E80CC / 12au7 equivalent but more gain. minimum hours or new I can’t remember.-
Price: AUD $80
-
Condition: Excellent
-
Region/State: (WA) Western Australia/Australia
-
Payment Method: Any
0 comments
Submitted
-
-
EXPIRED GEC U52 Valves/Tubes
By missmurphy
1950s brown base GEC u52 rectifier, d getter black plates i bought this as a replacement for my stereo 20 valve amp , and I must say that it is the best tube I have heard in that position! It hands down beats the metal base gz34 and f31 fat base, but it should not really see that size of a first cap, it probably wouldn’t bother it in reality as I have used a gz37 for 10 years in a leak 20 but I’m building a pair of monos and need two different tubes so this can be sold if you have-
Price: AUD $400
-
Condition: Good
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Cash / eft
0 comments
Submitted
-
-
EXPIRED Philips Miniwatt 6201 (12AT7 E81CC ECC801) Valves/Tubes
By dwbasement
Philips miniwatt 6201 (12at7, e81cc) special quality gold pins, this one is the rare pinched waist type. I have used only to make sure it is working. I do not have a tester to confirm value but it was bought as tested like new. Pick up available from Ultimo NSW2007 office hours or Lindfield NSW2070 after hours. Postage $15 flat insured or $10 uninsured with tracking.-
Price: AUD $128
-
Condition: Excellent
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Paypal f&f COP, PayID
0 comments
Submitted
-
-
EXPIRED Mullard E80CC Valves/Tubes
By Ed369
Mullard E80CC / 12au7 equivalent but more gain. minimum hours or new I can’t remember.-
Price: AUD $80
-
Condition: Excellent
-
Region/State: (WA) Western Australia/Australia
-
Payment Method: Any
Submitted
-
-
EXPIRED GEC U52 Valves/Tubes
By missmurphy
1950s brown base GEC u52 rectifier, d getter black plates i bought this as a replacement for my stereo 20 valve amp , and I must say that it is the best tube I have heard in that position! It hands down beats the metal base gz34 and f31 fat base, but it should not really see that size of a first cap, it probably wouldn’t bother it in reality as I have used a gz37 for 10 years in a leak 20 but I’m building a pair of monos and need two different tubes so this can be sold if you have-
Price: AUD $400
-
Condition: Good
-
Region/State: (NSW) New South Wales/Australia
-
Payment Method: Cash / eft
0 comments
Submitted
-
