For Sale Krix Neuphonix RT Floorstanding Loudspeakers

Further Information

SPECIFICATION

Frequency Range: 30Hz – 40kHz in room response
Power Handling: Maximum 200 watts RMS amplifier power
Sensitivity: 90dB for 2.83 volts at 1 metre
Configuration: 6 driver 3-way bi-wirable / bi-ampable
Bass Driver(s): 4 x nominal 130mm (5″) coated paper cones. 26mm (1″) voice coil wound on high powered aluminium former provides good linearity and driver control at large cone excursion
Midrange Driver: 1 x nominal 130mm (5″) coated paper cone. 26mm (1″) voice coil wound on high powered aluminium former, using copper shorting ring and oversized magnet for lower distortion
Tweeter: 26mm (1″) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion
Crossover Points: 340Hz & 2.5kHz
Impedance: Nominally 4 ohms
Enclosure Type: Dual chambers – sealed midrange chamber, with bass reflex main chamber, rear vented with internal / external flaring
Dimensions: 1065mm high x 230mm wide x 430mm deep
Material: 19mm MDF enclosure, heavily braced, with 25mm MDF front baffle
Finish: Lacquered timber veneer
Volume: 68 litres internal
Weight: 31kg each