For Sale Parasound A52+ (1 of 2) Multichannel Amplifier

Further Information

Parasound HALO home theater power amps. This is one of two A52+ five channel amps previously used in my home theater. Both present and perform as new.

Includes original accessories. Double boxed so can be safely shipped anywhere in Australia. Please message me with your postcode for a quote.

From the manufacturer -

Power Output - All 5 Channels Driven

• 180 watts x 5, 8 Ω
• 255 watts x 5, 4 Ω
• Power Output - 2 Channels Driven
• 225 watts x 2, 8 Ω
• 350 watts x 2, 4 Ω

Power measurements parameters with 120VAC
0.05% THD, RMS continuous power,
full audio band (20 Hz - 20 kHz)

Current Capacity:
45 amperes peak, per channel

Dynamic Headroom:
>1.5dB

Slew Rate
> 130 volts per microsecond

Frequency Response
5 Hz - 100 kHz, +0/-3 dB
20 Hz - 20 kHz, +0/-0.3 dB

Total Harmonic Distortion (THD)
< 0.05 % at full power
< 0.03 % at typical listening levels

IM Distortion
< 0.04 %

TIM
Unmeasurable

Interchannel Crosstalk
> 78 dB at 1 kHz
> 63 dB at 20 kHz

Input Impedance
Unbalanced: 47 kΩ
Balanced: 94 kΩ, 47 kΩ per leg

Input Sensitivity for 28.28 V Output into 8 Ω
Unbalanced: 1 V
Balanced: 1 V per leg

Total Gain: 29 dB

S/N Ratio
> 112 dB, input shorted, IHF A-weighted
> 102 dB, input shorted, unweighted

Damping Factor
> 1100 at 20 Hz

DC Trigger Requirements
+9 Vdc to +12 Vdc, 5 mA

Audio Trigger Requirements
2 mV - 10 mV

XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

Dimensions
Width: 17-1/4" (437 mm)
Height without feet: 5-1/4" (133 mm)
Height with feet: 5-7/8" (149 mm)
Depth: 20" (508 mm)
Depth with cables: 21-1/4" (540 mm)

Net Weight
55 lb. (25 kg)

Shipping Weight
69 lb. (31.3 kg)

Power Requirement
Standby: 1 Watt
Idle: 125 Watts
Maximum: 1500 Watts