Woody982

It would be nice to test it out if it was an option for sure. What do you think of pairing them with the Elektra HD2?

Yes my apologies, I did mean power amp! Have edited the post. The reason I got the A6A is for the HDMI 2.1 capabilities and I had a Yamaha RX-A3080 before that and I was happy with the AVR. However I recently upgraded my TV to an 83" C2 OLED and wanted to be able to take full advantage of all the features, e.g. 4K 120Hz, VRR etc when gaming on the PS5. I have had a look at processors that can do 4k120Hz/have HDMI 2.1 etc... but they all seem to be from brands that are probably about double the price, if not more than what I paid for the A6A - from memory I paid about $3100 on sale. I previously had my Zensor 7's powered by some Wyred4Sound MC7150 amps and I do believe it improved the sound over just using the the Yamaha A3080.

G'day all! I'm looking at upgrading my front stage to a pair of Dali Oberon 9's and a Dali Oberon Grand Vokal centre! I'm looking into power amp options now to drive them too. Been looking at the Elektra HD2's and have seen some good used prices on here for them in a 7 channel configuration. Do you guys think these are a good option? The Oberon 9's have a recommended power of 25-400W and the Oberon Grand Vokal is 25-200W. I'm thinking I'll either get just a 3 channel amp to power the front stage, or I'll get a 7 channel if I can get it for a good priced. The rest of the setup will be my current 4 Dali Zensor 7's, currently running through a Yamaha A6A. Thanks all!

Further Information: Flagship 4k UHD Yamaha reciever. All accessories included. In great condition, only selling due to upgrading to the current Flagship Yamaha model. Happy to post at agreed price or organise pickup. Can also organise to take it down anywhere between and including Ceduna and Adelaide.

Further Information: Hi all! Up for sale is my Ascension Timberwolf floor standers, Timberwolf Centre and 2 Ascencion subs. Sitting in storage and deserve to be put to good use!! Happy to sell together or seperate them Located in Ceduna SA, but head down to Kadina (near Adelaide) semi-regularly, so could organise to bring them down if you are near there or on the way. Postage is available and will be at buyers expense, heavy so will be a bit to post, however please note I don't have original packaging and will try to find something to fit them and fill with foam to protect as best I can. Ascension Timberwolf 6643 SRTL Floor Standing speakers 1120h x 200w x 345d. 150 Watt @ 8ohm Ascension Timberwolf 253 SR Centre Channel 800w mm X 160h mm X 315D. 150 Watt @ 8ohm 2x Ascension 1230ETL 12" subwoofers. 300 Watt

They get warm/hot, but not as hot as my AVR does when driven hard. AVR gets nearly too hot to touch, the amps don't get near that.

G'day Jason, I am more then happy to seperate!

Further information: 7 channel amps, they are in very good condition! These amps rrp for $2750! MC 7150 Multi-Channel Amplifier Specs • Typical THD+N 8Ω (10W out): 0.003% • Power Output 8Ω @ 0.2% THD+N (2 channels driven): 165W • Power Output 8Ω @ 1.0% THD+N (2 channels driven): 180W • Power Output 8Ω @ 0.2% THD+N (1 channels driven): 335W • Power Output 8Ω @ 1.0% THD+N (1 channels driven): 364W • Power Output 8Ω @ 1.0% THD+N (7 channels driven) benchtest: 120W • Output Idle Noise: <150µV • Frequency Response 20Hz-20kHz: ± 0.027db • Unbalanced Input Impedance: 61.9kΩ • Dynamic Range: 106db • Gain: 30db • Sensitivity: 1.15V • Min Load: 4Ω • Idle Power Consumption: <10W • Standby Power Consumption: <0.5W • Dimensions: L 13.75" W 15.75" H 4.625"

Further information: 7 channel amps, they are in very good condition! These amps rrp for $2750! MC 7150 Multi-Channel Amplifier Specs • Typical THD+N 8Ω (10W out): 0.003% • Power Output 8Ω @ 0.2% THD+N (2 channels driven): 165W • Power Output 8Ω @ 1.0% THD+N (2 channels driven): 180W • Power Output 8Ω @ 0.2% THD+N (1 channels driven): 335W • Power Output 8Ω @ 1.0% THD+N (1 channels driven): 364W • Power Output 8Ω @ 1.0% THD+N (7 channels driven) benchtest: 120W • Output Idle Noise: <150µV • Frequency Response 20Hz-20kHz: ± 0.027db • Unbalanced Input Impedance: 61.9kΩ • Dynamic Range: 106db • Gain: 30db • Sensitivity: 1.15V • Min Load: 4Ω • Idle Power Consumption: <10W • Standby Power Consumption: <0.5W • Dimensions: L 13.75" W 15.75" H 4.625"

Further information: 7 channel amps, they are in very good condition! These amps rrp for $2750, I'm selling as a pair for $4000, can sell individually too MC 7150 Multi-Channel Amplifier Specs Typical THD+N 8Ω (10W out): 0.003% Power Output 8Ω @ 0.2% THD+N (2 channels driven): 165W Power Output 8Ω @ 1.0% THD+N (2 channels driven): 180W Power Output 8Ω @ 0.2% THD+N (1 channels driven): 335W Power Output 8Ω @ 1.0% THD+N (1 channels driven): 364W Power Output 8Ω @ 1.0% THD+N (7 channels driven) benchtest: 120W Output Idle Noise: <150µV Frequency Response 20Hz-20kHz: ± 0.027db Unbalanced Input Impedance: 61.9kΩ Dynamic Range: 106db Gain: 30db Sensitivity: 1.15V Min Load: 4Ω Idle Power Consumption: <10W Standby Power Consumption: <0.5W Dimensions: L 13.75" W 15.75" H 4.625"

Hi mate, I have 2 Vokals for sale Edit: just realised this is from 2021 not 2022

Further information: Was using this paired with a SVS PB2000. The Velodyne performed better then the SVS. Have since gone to 3 subs... Amplifier: 2400 watts Dynamic / 1200 watts RMS Tiny cabinet dimensions An intuitive front panel interactive display One button 7-band room bass correction DSP digital control Full feature remote control 4 customized listening more presets Night-mode Dynamic Drive Control Patented Energy Recovery System amplifiers Dual layer voice coil Dimensions: H 34.3 cm x W 33.0 cm x D 40.6 cm Weight: 20.0 kg Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that upon successful sale of your item it is expected you pay Seller's Fees. - if you have previously sold items and not made a contribution, your advertisement may not be approved.

Further information: I was using dual Centre speakers and it worked great, however I've upgraded my front stage so not needed now. Can seperate if required DALI ZENSOR VOKAL SPECS Product series ZENSOR Frequency Range (+/-3 dB) [Hz] 47 - 26,500 Sensitivity (2,83 V/1 m) [dB] 88.5 Nominal Impedance [ohms] 6 Maximum SPL [dB] 109 Recommended Amplifier Power [W] 30 - 120 Crossover Frequency [Hz] 2,400 Hz High frequency driver, Quantity 1 x 25 mm High frequency driver, Diaphragm type Soft Textile Dome Low frequency driver, Quantity 2 x 5.25" Low frequency driver, Diaphragm type Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz] 45.0 Connection Input Single Wire Magnetic Shielding Semi Magnetic Shielded Recommended Placement Centre / Soundbar Dimensions With Base (HxWxD) [mm] 161 x 441 x 288 Accessories Included Manual Rubber Bumpers Optional Accessories White Grille Weight [kg] 6.8 Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that upon successful sale of your item it is expected you pay Seller's Fees. - if you have previously sold items and not made a contribution, your advertisement may not be approved.

Further information: Used them as height speakers, however I have gone back to just floor speakers in the new house. They served me well... DALI ZENSOR 1 SPECS Product series ZENSOR Frequency Range (+/-3 dB) [Hz] 53 - 26,500 Sensitivity (2,83 V/1 m) [dB] 86.5 Nominal Impedance [ohms] 6 Maximum SPL [dB] 106 Recommended Amplifier Power [W] 25 - 100 Crossover Frequency [Hz] 2,900 Hz High frequency driver, Quantity 1 x 25 mm High frequency driver, Diaphragm type Soft Textile Dome Low frequency driver, Quantity 1 x 5.25" Low frequency driver, Diaphragm type Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz] 51.5 Connection Input Single Wire Magnetic Shielding Semi Magnetic Shielded Recommended Placement On-Wall Shelf or stand Dimensions With Base (HxWxD) [mm] 274 x 162 x 220 Accessories Included Manual Rubber Bumpers Optional Accessories White Grille Weight [kg] 4.2 Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that upon successful sale of your item it is expected you pay Seller's Fees. - if you have previously sold items and not made a contribution, your advertisement may not be approved.

Further information: These have served me well. Have upgraded front stage so no longer required. DALI ZENSOR 7 SPECS Product series ZENSOR Frequency Range (+/-3 dB) [Hz] 40 - 26,500 Sensitivity (2,83 V/1 m) [dB] 90.0 Nominal Impedance [ohms] 6 Maximum SPL [dB] 110 Recommended Amplifier Power [W] 40 - 150 Crossover Frequency [Hz] 2,400 Hz High frequency driver, Quantity 1 x 25 mm High frequency driver, Diaphragm type Soft Textile Dome Low frequency driver, Quantity 2 x 7" Low frequency driver, Diaphragm type Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz] 40.0 Connection Input Single Wire Magnetic Shielding No Recommended Placement Floor Recommended Distance From Wall [cm] 20 - 80 Dimensions With Base (HxWxD) [mm] 994 x 257 x 320 Accessories Included Manual Rubber Bumpers Spikes Spikes M6 Optional Accessories White Grille Weight [kg] 14.9 Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that upon successful sale of your item it is expected you pay Seller's Fees. - if you have previously sold items and not made a contribution, your advertisement may not be approved.

Hi all! I'm looking at getting a Sennheiser HD 660S and a dac and amp to power it for on the pc. I'm currently looking between a second hand Topping DX7 PRO vs SMSL SU-8 + SMSL SP200. So was wondering if those of you who are more knowledgeable, could tell me which one you think would be better run! Thanks alot! Edit: I can get them for the same price, so wondering which would better

I am interested, if you are negotiable on price (found it cheaper elsewhere, second hand as well) and you would post!

G'day everyone, Just wondering if I could pick your brains for recommendations for curtains and rails... I'm looking for curtains and rails that go floor to ceiling for 2 sides of my home theatre room. The room is about 6.1 metres long, one side has a big triple window and the other has a double door (with glass windows). I would like to get some good black out curtains to block out all of the light and I decided to go full length for the length and height of the room as I've seen a few pictures of that setup and it looks great - I think it would add great atmosphere. I won't be doing this for a while, so just looking for some recommendations and ideas for it! Any help is greatly appreciated!! Thanks all Pic of my current setup for attention (not where the curtains will go) ☺

Yeah it is powered. Tried having it off at power board and unplugged - no Bueno

² Thanks, mt couch is that "Rhino material" but the base is all metal as it's a recliner couch. I'll give it a go!

I forgot to include in the original post that it only started doing this after upgrading to having amps as well - rather then just the AVR It wouldn't be anything to do with that, as I'm playing the media through the Shield, which is connected via Ethernet Don't get up? Do you think some left over speaker wire would work? And what would you earth it to? Just dangling to touch the floor or?

My TV and AVR are hooked up to wifi yes

Hey guys, have a strange problem... I'll attach a video if i can, but basically when I get up from the couch most of the time the audio and video will cut out for a few seconds... Thanks in advance all!

Further information: Was used for 5.1 and worked great. All books and accessories included. Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (excluding RRP), your ad will not be approved If you are advertising multiple items, you must post one bulk price only, or post seperate ads for each item If you don't include photographs of the actual item being sold, your ad will not be approved You understand that a reasonable donation for selling fees is expected upon successful sale of your item - if you have previously sold items and not made a donation, your advertisement may not be approved.

G'day all, I' just upgraded my setup and am trying to set it as a 9.2 surround with my Yamaha RX-A3080 AVR. The problem I'm facing is I had to plug the middle speakers into the front presence and in the setup options there only seems to be options of: Front Height, Overhead and Dolby Enabled SP... Would anyone know it is possible to do 9.2 with this AVR? I assumed you could as its advertised as a 9.2 one but yeah...