Sound Gallery

Further information: Cyrus Stack for sale - CYRUS: 82 DAC, CYRUS: PSX-R2, CYRUS: STREAM X 2 SIGNATURE and CYRUS dAD 3. No Box, comes with one remote and power cords. Manuals can be downloaded online. All the unit has been serviced and checked, the streamer just came back from an update from the distributor. All you need is a pair of speakers and you are ready to go! - CYRUS 82 DAC – INTEGRATED STEREO AMPLIFIER | CYRUS CYRUS 82 DAC The 8₂ DAC is our most flexible integrated amplifier. A high quality and scalable design provides an impressive 88 Watts per channel, and includes six analogue inputs which you can individually name from a list of options in the set up wizard. Also included is a great headphone facility and twin speaker output for bi-wiring. Advanced Technology The 8₂ DAC delivers surprising audio performance and value because it is based on the advanced preamplifier circuitry from the DAC XP Signature; benefiting from a ‘trickle down’ of our most advanced technology. Integrated Amplifier The bi-wire output of the 8₂ DAC gives a full 88 Watts into 6 ohms. The power supply is a high current design that uses two transformers to completely separate the digital control stages from the sensitive audio signals. Integrated DAC The 8₂ DAC features a high performance 24/192 DAC with optical and coaxial inputs and a driver less USB connection for plug and play connectivity to a PC or laptop. Upgrade to ‘Qx’ specification for upsampling DAC design from the DAC XP Signature.. Essential Connectivity Six analogue inputs, a high quality headphone amplifier, Zone 2 and pre amplifier outputs give the 8₂ DAC flexibility for connecting a wide variety of audio devices. There is also a PSX-R port on the 8₂ DAC allowing connectivity of the instant upgrade off-board power supply. Advanced Setup The microprocessor controlled operating system in the 8₂ DAC allows extensive programming of many functions within the unit. Input naming, differing display readouts and input volume matching across all sources are just some of the possibilities. OverView The 8₂ DAC is our most flexible integrated amplifier. A high quality and scalable design provides an impressive 88 Watts per channel, and includes six analogue inputs which you can individually name from a list of options in the set up wizard. Also included is a great headphone facility and twin speaker output for bi-wiring. This amplifier can be upgraded to include a Qx module to add an upsampling 24/192 DAC. 8₂ DAC is the perfect partner for the CD i or CD t. - CYRUS PSX-R2 – FULLY REGULATED POWER SUPPLY | CYRUS PSX-R₂ PSX-R₂ provides an extremely smooth and stable DC feed allowing any partnered component to achieve its full potential. Perceive new levels of fine detail, the PSX-R₂ allows you to comprehend subtle emotional nuances that expose the performer’s emotion and passion. Re-designing a Classic The PSX-R₂ is based on a design that has been in the Cyrus family for over 30 years. The latest improvements bring power supply filtering from the Anniversary system, culminating in the new v2 edition. Instant Upgradability The PSX-R₂ provides an instant sonic improvement to any compatible product. The benefits of a separate, isolated and highly regulated power supply allow internal electronics to upgrade their sonic performance. Intelligent Connectivity No modifications are required when connecting a PSX-R₂ to partnering equipment. Both units intelligently adjust output and input parameters to suit. Simply power off both units, connect and power on; internal circuitry detects the connection and re-adjusts perfectly. 300VA Toroidal A 300va toroidal transformer was chosen for its ability to deliver an enormous current, forming the front end of the PSX-R₂. The 30,000 microfarad slit foil reservoir capacitors ensure that very low ESR and wide bandwidth are presented to the linear mode regulator stage that follows. Over View PSX-R₂ provides an extremely smooth and stable DC feed allowing any partnered component to achieve its full potential. Perceive new levels of fine detail, the PSX-R₂ allows you to comprehend subtle emotional nuances that expose the performer’s emotion and passion. These elements are always captured in the recording but unresolved until the system is able to discern a higher level of detail. A stable, strong and separated power supply can provide huge sound quality benefits for a hi-fi system. - CYRUS STREAM X SIGNATURE – PREMIUM STREAMING ENGINE | CYRUS STREAM X SIGNATURE Stream X Signature is our highest performance streamer source component; it uses Cyrus’ state-of-the-art streaming engine and has been developed to provide the best sound resolution possible from a network audio library. It will fully exploit the highest quality 24-bit/192 kHz files. Advanced Engine Supporting all popular formats, Stream X Signature is able to stream audio from USB, NAS drives or even iPod devices in high resolution up to 24/192kHz Signature Digital Output By removing all analogue audio components the Stream X Signature is a pure digital transport. This gives the best performance when using a digital output into Cyrus’ high performance DAC’s. Essential Connectivity Wi-Fi or Ethernet, integration into your home network is effortless and reliable. Additional sources? No problem, there are 5 digital pass-through inputs, and high performance digital output. Internet Radio If you love radio you will love TuneIn radio. With over 100,000 channels available, both local and national, the choice for music is as endless. Effortless Control Once connected, download our free Cadence app from iOS App Store or Google Play Store for a complete and intuitive control system. All key system functions, along with playlist creation and storing favourite internet radio stations, are available when using Cadence. Overview Stream X Signature is our highest performance streamer source component; it uses Cyrus’ state-of-the-art streaming engine and has been developed to provide the best sound resolution possible from a network audio library. It will fully exploit the highest quality 24-bit/192 kHz files. Make the most of the latest high resolution music files, or upgrade the quality of your CD resolution music1. Our flagship music streamer allows you to browse and select from your entire music collection using our Cadence app for iOS and Android. Stream from any UPnP or DLNA device, or use one of the streamer’s host of additional inputs to play music from your PC or mp3 player. With simple set up, seamless navigation and sensational sound quality, listening to music just got a whole lot more enjoyable! For the ultimate hi-fi system, use the Stream X Signature with a DAC XP Signature and a pair of Mono X 300 Signature’s . Include a CD Xt Signature to add CD compatibility to your system. - CYRUS dAD3 CD PLAYER The Cyrus dAD3 follows the lead of our world class Discmaster/Dacmaster two box player, sharing many of its advanced techniques and benefiting directly from Cyrus’s ten years experience in CD technology. The quality lightweight die-cast enclosure of Cyrus dAD3 has a myriad of advantages both electrically and mechanically. The non-resonant nature of the alloy minimises microphonic effects, while its non-ferrous composition provides an effective shield from external electromagnetic disturbances. This also eliminates coupling of the power transformer stray magnetic fields to the sensitive audio circuitry. dAD3’s 18 bit Digital to Analogue conversion module achieves well over 100 dB true dynamic range with negligible distortion. Handed down from Dacmaster’s development this implementation results in superior resolution of the low-level signals that in turn enables the system to reproduce the subtle nuances of the music and the atmosphere of the recording venue accurately. The high stability, low jitter system clock system specifically developed for the Cyrus dAD3 is featured to ensure that low level information is not masked by time related distortion artefacts. Jitter related aberrations produce a complex type of anharmonics distortion that results in smearing and loss of clarity in the mid-range. Extensive inter-stage Power supply decoupling together with star-earthing techniques are responsible for isolating the sensitive analogue stages from high-speed digital circuits. The net result of this measure is the total absence of Power supply imprint onto the signal lines that can account for loss of coherent musical timing. Technical Information Electrical Transport – Integral Isolated Loader CDM with monolithic glass LASER assembly Outputs – Stereo audio and optical TOSLink Power Supply – 9 fully regulated power supplies Display – Custom LCD with subtle green back lighting Remote Control – Full function remote control facility Communications – MC-BUS System BUS Specifications Audio output – 2V rms. Frequency response – 20Hz-20kHz THD – <0.008% (ref. 1kHz, -10dB) S/N ratio – 100dBA Dynamic Range – >100 dB (20 Hz to 20 kHz) Channel separation – >100dB (1kHz), >95dB (20kHz) Clock Jitter – <100pS Power Consumption – 16W (12W Standby) Weight – 3.5 Kg Dimensions – (H x W x D) 78 x 215 x 360 (mm) Finish – Black

Further information: Very useful to protect and even improve for low power gear especially for your TV, Blu Ray Player, Streamer/Setup box and so on. I have a few of them if someone needs more than one. Furman AC-210A E 10 Amp compact power conditioner with auto-resetting voltage protection. Export. The AC-210AE compact power conditioner features Furman’s revolutionary SMP technology. Furman’s Series Multi-Stage Protection (SMP) circuit features our exclusive Linear Filter Technology (LiFT) and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, the world’s most advanced and comprehensive transient voltage surge suppressor. SMP (Series Multi-Stage Protection Plus) Furman’s SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP. With Furman’s SMP, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time. Unique to Furman’s SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDA’s A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furman’s SMP clamps at 376VAC peak, 275 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman’s SMP technology. LiFT (Linear Filtering Technology) Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furman’s SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground. E.V.S. (Extreme Voltage Shutdown) Furman’s trusted overvoltage circuitry protects against all too frequent accidental connections to extreme voltage by shutting off the incoming power until the overvoltage condition is corrected. Compact Chassis Design At only 1.75'H x 5'W x 8.5'D, and weighing in at only 3 lbs., the AC-210 A E's compact, low-profile design makes it ideal for mounting to the back of a flat-screen television, or anywhere that discretely located, remote power protection and purification are needed.

Mint Thorens TD-160B MKII Turntable with original box and manual , SME 3009 tonearm with manual & Stanton 681EEE Cartridge for sale. All the correct era combination in mint condition. The Thorens TD-160B MKII turnatable and the SME 3009 tonearm was serviced, tuned and set up with the Stanton 681EEE Cartridge. The power cord was changed because the old one has harden due to age. It comes with the original box, packaging and manuals for both the turntable and the tonearm. The condition is very good, no scratch or dent. The cover does has some light swirl mark. Please check out the pictures.

ATC SIACD CD player/DAC/amplifier combination for sale, comes with original packaging, manual, power cord and remote control. The unit is in very good condition other the a small dent on top of the unit close to the vent, please check the photos. Specifications taken from online: ATC SIACD Features: New class AB “grounded source” power amp stages offering class leading performance USB, coaxial and optical inputs 2 x line level analogue inputs 1 x analogue pre-out On-board CD Player Front panel mounted headphone amplifier Black and Silver anodised finish options 6 year warranty (CD mechanism covered by a 12 month warranty) Hand built in the UK Specifications Integrated Amplifier: Power Output (Continuous Av, 8 Ω, 1kHz, both channels driven): 100W Line Input Sensitivity: 640mV Input Impedance: 13k8 Ohms Frequency Response (-3dB): 2Hz – 250KHz Total Harmonic Distortion (8 Ohms, -1dB below full power): 1kHz <0.0015% (-96dB), 10kHz <0.002% (-90dB) Crosstalk (10Hz – 20kHz): >80dB S+N/N Ratio: >100dB (Wide band) >110dB (DIN) >115dB (IEC”A”) Absolute Phase: Phono Zero Degrees CD Player: Distortion: 1kHz <0.002% (-94dB), 10kHz <0.003% (-90dB) Frequency Response (+/- 0.1dB): 20Hz – 20kHz S+N/N Ratio: >100dB (IEC”A”) Digital Inputs – Coaxial & Optical: Distortion: 1kHz <0.0025% (-92dB), 10kHz <0.004% (-88dB) Frequency Response (+/- 0.1dB): 20Hz – 20kHz S+N/N Ratio: >96dB (IEC”A”) Supported Word Lengths: 16 to 24 Bit Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz Digital Inputs – USB: Distortion: <0.005% S+N/N Ratio: >96dB Supported Word Lengths: up to 16 bit Supported Sample Rates: 32kHz, 44.1kHz, 48kHz Dimensions(HxWxD): 112 x 315 x 425 mm Weight: 9.6kg

It will do so for sure easily under load. It is actually quite a rare and good sounding unit if you want a simple one box CD, DAC, Haedphone Amp, Pre Amp and Power Amplifier with the possibility of adding streamer (Digital in), phono (Analogue in for Turntable) and power amp in the future.

Further information: ATC SIACD CD player/DAC/amplifier combination for sale, comes with original packaging, manual, power cord and remote control. The unit is in very good condition other the a dent on top of the unit close to the vent, please check the photos. Specifications taken from online: ATC SIACD Features: New class AB “grounded source” power amp stages offering class leading performance USB, coaxial and optical inputs 2 x line level analogue inputs 1 x analogue pre-out On-board CD Player Front panel mounted headphone amplifier Black and Silver anodised finish options 6 year warranty (CD mechanism covered by a 12 month warranty) Hand built in the UK Specifications Integrated Amplifier: Power Output (Continuous Av, 8 Ω, 1kHz, both channels driven): 100W Line Input Sensitivity: 640mV Input Impedance: 13k8 Ohms Frequency Response (-3dB): 2Hz – 250KHz Total Harmonic Distortion (8 Ohms, -1dB below full power): 1kHz <0.0015% (-96dB), 10kHz <0.002% (-90dB) Crosstalk (10Hz – 20kHz): >80dB S+N/N Ratio: >100dB (Wide band) >110dB (DIN) >115dB (IEC”A”) Absolute Phase: Phono Zero Degrees CD Player: Distortion: 1kHz <0.002% (-94dB), 10kHz <0.003% (-90dB) Frequency Response (+/- 0.1dB): 20Hz – 20kHz S+N/N Ratio: >100dB (IEC”A”) Digital Inputs – Coaxial & Optical: Distortion: 1kHz <0.0025% (-92dB), 10kHz <0.004% (-88dB) Frequency Response (+/- 0.1dB): 20Hz – 20kHz S+N/N Ratio: >96dB (IEC”A”) Supported Word Lengths: 16 to 24 Bit Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 192kHz Digital Inputs – USB: Distortion: <0.005% S+N/N Ratio: >96dB Supported Word Lengths: up to 16 bit Supported Sample Rates: 32kHz, 44.1kHz, 48kHz Dimensions(HxWxD): 112 x 315 x 425 mm Weight: 9.6kg

Further information: Apple iMac 27" Intel Quad Core i5 3.1Ghz, Comes with 8GB with 2 slots free, the hard disk has been updated to 500GB SSD, a vertically-mounted slot-loading DVDR DL "SuperDrive" and dedicated AMD Radeon HD 6970M graphics with 1 GB of dedicated GDDR5 memory. Connectivity includes four USB 2.0 ports, a Firewire "800" port, built-in AirPort Extreme, Gigabit Ethernet, and an SDXC card slot as well as dual "Thunderbolt" ports that are backwards compatible with Mini DisplayPort and, likewise, each support an external display up to 30" (2560x1600). Thunderbolt also supports other peripherals that use the Thunderbolt standard which provides up to 10 Gbps of bandwidth in both directions. Comes with original power cord, Apple Wireless Keyboard, Wireless Magic Mouse and will throw in as new Magic Trackpad. Unit has been restore and updated to macOS High Sierra ready for use. Condition is very good, please check out the pictures. Unfortunately I do not have original box so local pick up without contact is preferred, or else for delivery it will be well packed for freight. Photos:

No perfect system, just have to balance a system for both family and yourself I guess!

Sold pending payment. Thanks for all the interest.

Further information: This is a rare beast and no one makes AV receiver like that anymore other then proper seperate pre processor and power amp; which this unit literally is. The top part is the processor and the bottom part is the power amp section. It will drive anything at 200W at 8 ohms. This unit is in very good condition, comes with remote but no original box. it will be well packed if needed. Reviews: https://www.whathifi.com/au/pioneer/sc-lx90/review https://www.techradar.com/au/reviews/audio-visual/hi-fi-and-audio/receivers/pioneer-sc-lx90-422279/review https://alatest.com/reviews/receiver-amplifier-reviews/pioneer-sc-lx90/po3-57006265,86/ https://www.hifinews.com/content/pioneer-sc-lx90-£5000 Manufacture's link: http://www.pioneerhongkong.com.hk/mini_site/sc-lx90/spec/index.html

Yes, there are a few out there matched with Grace 707 tonearm!

Yes it is, very rare to see it in such condition with everything complete.

Further information: Mint Thorens TD-160B MKII Turntable with original box and manual , SME 3009 tonearm with manual & Stanton 681EEE Cartridge for sale. All the correct era combination in mint condition. The Thorens TD-160B MKII turnatable and the SME 3009 tonearm was serviced, tuned and set up with the Stanton 681EEE Cartridge. The power cord was changed because the old one has harden due to age. It comes with the original box, packaging and manuals for both the turntable and the tonearm. The condition is very good, no scratch or dent. The cover does has some light swirl mark. Please check out the pictures.

Further information: Selling on behalf of a customer. The cartridge is used to remaster some old mono recordings and kept away since from the studio. It is as new condition and very rare. https://positive-feedback.com/reviews/hardware-reviews/grado-epoch-mono-cartridge/ https://snvinyl.co.uk/Grado-Epoch-Lineage-Cartridge-Moving-Magnet-MM-1 https://www.ttvjaudio.com/Grado-Epoch3-MI-Phono-Cartridge-p/gra0000075.htm

Further information: Used but in very good condition, there is a scratch mark on the black plastic underneath. Please check out the pic. It comes with all accessories and box including remote and basic cables. Taken from manufacturer's website: In 2014, we introduced Hugo, a revolutionary portable DAC and headphone amp that became a landmark product in the audio landscape. Advances in digital technology, including the latest FPGAs and WTA (Watts Transient Aligned) filters, have enabled us to introduce a next-generation version, Hugo 2, featuring flexible new features, plus next-generation technical and sonic performance. Hugo 2 can be used both at home and on-the-go, either with headphones or within a conventional audio system. Its line-level output and full-function remote control adds real flexibility in full-size and desktop systems. The device offers four digital inputs (optical, coaxial and HD USB) plus extended-range Bluetooth, with high-resolution file playback up to 768kHz and up to DSD512 (Octa DSD), via its HD USB input. Analogue outputs include 2x RCA, plus 3.5mm and 6.35mm headphone outputs. A four-function switch filter offers a useful degree of user-selectable frequency-shaping, bringing warm and soft or transparent and incisive presentations, giving additional flexibility and user control. For headphone-listening, Hugo 2 retains the popular digital crossfeed function of the original and offers three operation modes. The system duplicates the effect of listening to speakers and is based on advanced binaural audio research. Hugo 2 features four spherical control buttons, which illuminate with colour-coding information and control power, input, filtering, plus the unit’s crossfeed functions. Battery playing time is around seven hours and two modes of automatic charging are included using the dedicated Micro USB charging port; an indicator shows charging and battery-charge status. HUGO 2 – SPECIFICATIONS: Materials: Clamshell precision machined aluminium casing with polycarbonate buttons, acrylic signal window, and glass viewing portal. Available in a choice of two colours – natural silver, and satin black Battery: 2x Rechargeable custom Enix Energies 3.7v 9.6Wh Li-ion (lithium-ion (2600mAh) batteries* Tap length filter: 49,152 – 10 element Pulse Array design Play time: In excess of seven (7) hours Charging: Nominal six (6) hours via Micro USB at 1.8amps (fast charge) – Nominal eight (8) hours at 1amp (slow charge) Connectivity (input): Micro USB (White): 44.1kHz to 768kHz – 16bit to 32bit Coax via 3.5mm Jack (Red): 44.1kHz to 384kHz – 16bit to 32bit Dual data mode input (using both BNC coax inputs together): 44.1kHz to 768kHz – 16bit to 32bit Optical (Green): 44.1kHz to 96kHz – 16bit to 24bit Connectivity (input wireless): Bluetooth (Apt X) (Blue): 44.1kHz to 48kHz – 16bit Connectivity (output): 1x ¼” jack headphone output 1x 3.5mm jack headphone output 1x stereo (L & R) RCA output PCM support: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 358.8kHz, 384kHz, 717.6kHz, and 768kHz. 16 – 32bit DSD support: Native playback supported. DSD64 (Single) to DSD512 (Octa-DSD) Volume control: Digital, activated in 1dB increments. Last known state saved upon shutdown, with exception of line-level mode Line-level mode: Activated via dual press of middle ‘Source’ and ‘Crossfeed’ buttons. Line level = 3v via all outputs. Reset by power cycle Power saving mode: Auto-shutdown after ten minutes of input inactivity Driver support: Driverless with Mac OS X and Linux, driver required for Windows OS

Further information: P3.0 Floorstanding Loudspeaker The flagship within the new Precision Series. The P3.0 delivers emphatically. A true High-End audio thoroughbred. Expertise in Design & Construction Three-decades of Research & Development underpin the Wilson Benesch Design Team. The Precision Series distills core Wilson Benesch loudspeaker technologies within its loudspeaker enclosures. With trickle-down technology from the reference line evident throughout its design. ALUMINIUM TOP & BOTTOM BRACING The Precision Series used a multi-material hybridised structure. This design philosophy has been developed by Wilson Benesch over three-decades of loudspeaker enclosure design. By combining multiple-materials in this way the designer is essentially forming a composite structure that allows the unique properties of each material to be used to create a design advantage. This exact same hybridised design ethos is used in the reference line Geometry Series. The distinct Precision Series top and bottom 'caps', whilst elegant forms, are in fact critical components in the enclosure design. Precision CNC-machined from solid billets of aluminium, the caps lock in position the front and rear aluminum baffles with the wood side panels. The caps are then tied along the vertical axis of the Precision Series enclosure using aluminium alloy bars that brace the enclosure and compress the whole structure to ensure it is as sonically inert and stiff as possible. This tie and brace design is used across the Geometry Series and also within the Isobars of the R1 HIFI Rack. This construction technology is another example of trickle-down technologies taken directly from our reference line. LEONARDO TWEETER The Leonardo Tweeter has been developed directly through an iterative design approach that gave birth to the Fibonnaci and Semisphere Tweeters before it. Unlike these exotic wide-bandwidth designs, the Leonardo does not employ a hybridised Silk-Carbon dome and thus its frequency response is flat to 24 kHz. However the geometrically optimised and decoupled polymer-carbon fibre faceplate is taken directly from the same shelf as that used in the Eminence loudspeaker. This entirely proprietary component is manufactured in-house using the latest 3D printing technology. The faceplate acts as a waveguide to guarantee optimal dispersion and phase characteristics for the Leonardo Tweeter. Just like the Semisphere Tweeter, Leonardo features the proprietary Neodymium magnet ring in its rear chamber. This open architecture ensures optimal energy paths for both acoustic and thermal energy; critical design considerations where super low distortion levels are aspired to. TACTIC II DRIVE UNIT: Design Philosophy At the very core of the development of Wilson Benesch drive unit technology was the ethos that transient response time should be reduced as much as possible. That is to say the response of the drive unit to change from equilibrium or steady state. There are no delays in nature and yet when a dynamic drive unit attempts to reproduce a range of frequencies from a recording, the laws of physics dictate that the moving mass of the drive unit will always reproduce sound with some delay. This is an unavoidable design limitation of all dynamic drive unit designs today. However these physical laws can be observed and used as a guide to optimise the dynamic drive unit design. By introducing light and stiff materials to reduce mass, powerful rare-earth magnets to increase power and control, highly optimised structural design to maximise the unique properties of each material and form within the structure, the Tactic II drive unit is a near optimal dynamic drive unit design. Wilson Benesch has iteratively developed four drive unit designs. These have been referred to by the independent press as “lightning fast” and "one-third dynamic, two-thirds electrostatic". Testament to the design ethos at the core of these technological developments. TACTIC II DRIVE UNIT: Isotactic Polypropylene Arguably the most critical component in any dynamic drive unit design is the choice of material in the cone. Wilson Benesch was the first company in the world to develop a consumer product that used Isotactic Polypropylene. More than a decade on, this remains the material of choice in all our drive unit technologies. It's unique balance of high specific stiffness with exceptional damping provide what we regard as the optimum balance of material properties. Other hard dome technologies, including that using carbon fibre have been extensively tested. Without exception all these technologies result in the need to design complex crossovers to control unwanted resonances within the cone which arise from very high specific stiffness. This complexity within crossover design is regarded as a compromise. INTERNAL ENCLOSURE TIES & BRACES The hybridised Precision Series enclosure is further stiffened and damped using threaded steel bars. The bars terminate into threaded pockets on both the aluminium top and bottom caps, plus the front and rear aluminium baffles. The bars are then torqued to create a compressive force across both the vertical and horizontal axis of the Precision Series P3.0 enclosure. This design feature is used across our reference loudspeaker line and also within the Isobars of the R1 HIFI Rack. This construction technology is another example of trickle-down technologies taken directly from our reference line. INTERNAL DAMPING As the leader in loudspeaker enclosure design, Wilson Benesch incorporated into the design of the Precision Series numerous features that allow the enclosure to be stiffened and damped optimally. Another example of this is seen in the tubular structures that populate the internal enclosure to provide both increased stiffness but also damping of the Precision Series enclosure along its horizontal axis. P3.0 Specifications: DRIVE TECHNOLOGY 1x 25mm (1”) WB Leonardo Tweeter 1x 170mm (7”) WB Tactic II High Bass Drive Unit 1x 170mm (7”) WB Tactic II Midrange Drive Unit 1x 170mm (7”) WB Tactic II Low Bass Drive Unit CROSSOVER TOPOLOGY Tweeter 2nd-Order Crossover Midrange Directly Amplifier Coupled Upper Bass 1st-Order Crossover Air Cored Inductor Lower Bass 1st-Order Crossover with Laminated High Density Iron Cored Inductors with High Coil Packing Ratio ENCLOSURE TECHNOLOGY Hybrid Composite Construction U-Section High Torsion Aluminium Alloy Damping Rods in the Horizontal Axis Tubular Cross Bracing Double Reflex Port Tuning Alloy Baffle, Top, Foot with Machined Logos Front & Rear MEASUREMENTS 2.5-way, floorstanding loudspeaker Impedance: 6Ω nominal / 4Ω Minimal Sensitivity: 89dB at 1 metre on-axis, 2.83V input Frequency response: 31Hz - 24kHz +/- 2dB on-axis DIMENSIONS Height: 1255mm (49.4“) Width: 269mm (10.6”) Depth: 472mm (18.6”) Weight per Channel: 59kg (130 lbs)

Further information: P2.0 Floorstanding Loudspeaker A refined High-End floorstanding loudspeaker. The P2.0 delivers scale, emotion and authority with absolute control. Expertise in Design & Construction Three-decades of Research & Development underpin the Wilson Benesch Design Team. The Precision Series distills core Wilson Benesch loudspeaker technologies within its loudspeaker enclosures. With trickle-down technology from the reference line evident throughout its design. ALUMINIUM TOP & BOTTOM BRACING The Precision Series used a multi-material hybridised structure. This design philosophy has been developed by Wilson Benesch over three-decades of loudspeaker enclosure design. By combining multiple-materials in this way the designer is essentially forming a composite structure that allows the unique properties of each material to be used to create a design advantage. This exact same hybridised design ethos is used in the reference line Geometry Series. The distinct Precision Series top and bottom 'caps', whilst elegant forms, are in fact critical components in the enclosure design. Precision CNC-machined from solid billets of aluminium, the caps lock in position the front and rear aluminum baffles with the wood side panels. The caps are then tied along the vertical axis of the Precision Series enclosure using aluminium alloy bars that brace the enclosure and compress the whole structure to ensure it is as sonically inert and stiff as possible. This tie and brace design is used across the Geometry Series and also within the Isobars of the R1 HIFI Rack. This construction technology is another example of trickle-down technologies taken directly from our reference line. LEONARDO TWEETER The Leonardo Tweeter has been developed directly through an iterative design approach that gave birth to the Fibonnaci and Semisphere Tweeters before it. Unlike these exotic wide-bandwidth designs, the Leonardo does not employ a hybridised Silk-Carbon dome and thus its frequency response is flat to 24 kHz. However the geometrically optimised and decoupled polymer-carbon fibre faceplate is taken directly from the same shelf as that used in the Eminence loudspeaker. This entirely proprietary component is manufactured in-house using the latest 3D printing technology. The faceplate acts as a waveguide to guarantee optimal dispersion and phase characteristics for the Leonardo Tweeter. Just like the Semisphere Tweeter, Leonardo features the proprietary Neodymium magnet ring in its rear chamber. This open architecture ensures optimal energy paths for both acoustic and thermal energy; critical design considerations where super low distortion levels are aspired to. TACTIC II DRIVE UNIT: Design Philosophy At the very core of the development of Wilson Benesch drive unit technology was the ethos that transient response time should be reduced as much as possible. That is to say the response of the drive unit to change from equilibrium or steady state. There are no delays in nature and yet when a dynamic drive unit attempts to reproduce a range of frequencies from a recording, the laws of physics dictate that the moving mass of the drive unit will always reproduce sound with some delay. This is an unavoidable design limitation of all dynamic drive unit designs today. However these physical laws can be observed and used as a guide to optimise the dynamic drive unit design. By introducing light and stiff materials to reduce mass, powerful rare-earth magnets to increase power and control, highly optimised structural design to maximise the unique properties of each material and form within the structure, the Tactic II drive unit is a near optimal dynamic drive unit design. Wilson Benesch has iteratively developed four drive unit designs. These have been referred to by the independent press as “lightning fast” and "one-third dynamic, two-thirds electrostatic". Testament to the design ethos at the core of these technological developments. TACTIC II DRIVE UNIT: Isotactic Polypropylene Arguably the most critical component in any dynamic drive unit design is the choice of material in the cone. Wilson Benesch was the first company in the world to develop a consumer product that used Isotactic Polypropylene. More than a decade on, this remains the material of choice in all our drive unit technologies. It's unique balance of high specific stiffness with exceptional damping provide what we regard as the optimum balance of material properties. Other hard dome technologies, including that using carbon fibre have been extensively tested. Without exception all these technologies result in the need to design complex crossovers to control unwanted resonances within the cone which arise from very high specific stiffness. This complexity within crossover design is regarded as a compromise. INTERNAL ENCLOSURE TIES & BRACES The hybridised Precision Series enclosure is further stiffened and damped using threaded steel bars. The bars terminate into threaded pockets on both the aluminium top and bottom caps, plus the front and rear aluminium baffles. The bars are then torqued to create a compressive force across both the vertical and horizontal axis of the Precision Series P2.0 enclosure. This design feature is used across our reference loudspeaker line and also within the Isobars of the R1 HIFI Rack. This construction technology is another example of trickle-down technologies taken directly from our reference line. INTERNAL DAMPING As the leader in loudspeaker enclosure design, Wilson Benesch incorporated into the design of the Precision Series numerous features that allow the enclosure to be stiffened and damped optimally. Another example of this is seen in the tubular structures that populate the internal enclosure to provide both increased stiffness but also damping of the Precision Series enclosure along its horizontal axis. P2.0 Specifications: DRIVE TECHNOLOGY 1x 25mm (1”) WB Leonardo Tweeter 1x 170mm (7”) WB Tactic II Mid Drive Unit 1x 170mm (7") WB Tactic II Bass Drive Unit CROSSOVER TOPOLOGY Tweeter 2nd-Order Crossover Midrange Directly Amplifier Coupled Bass 1st-Order Crossover with Laminated High Density Iron Cored Inductors with High Coil Packing Ratio ENCLOSURE TECHNOLOGY Hybrid Composite Construction U-Section High Torsion Aluminium Alloy Damping Rods in the Horizontal Axis Tubular Cross Bracing Port Tuning Alloy Baffle, Top, Foot with Machined Logos Front & Rear MEASUREMENTS 2.5-way, floorstanding loudspeaker Impedance: 6Ω nominal / 4Ω Minimal Sensitivity: 89dB at 1 metre on-axis, 2.83V input Frequency response: 34Hz - 24kHz +/- 2dB on-axis DIMENSIONS Height: 1105mm (43.5“) Width: 269mm (10.6”) Depth: 472mm (18.6”) Weight per Channel: 50kg (110 lbs)

Further information: P1.0 Standmount Loudspeaker The entry into the new Precision Series. The P1.0 offers exceptional value and performance. Expertise in Design & Construction Three-decades of Research & Development underpin the Wilson Benesch Design Team. The Precision Series distills core Wilson Benesch loudspeaker technologies within its loudspeaker enclosures. With trickle-down technology from the reference line evident throughout its design. INTERNAL ENCLOSURE TIES & BRACES The hybridised Precision Series enclosure is further stiffened and damped using threaded steel bars. The bars terminate into threaded pockets on both the aluminium top and bottom caps, plus the front and rear aluminium baffles. The bars are then torqued to create a compressive force across the vertical axis of the Precision Series P1.0 enclosure. This design feature is used across our reference loudspeaker line and also within the Isobars of the R1 HIFI Rack. This construction technology is another example of trickle-down technologies taken directly from our reference line. ALUMINIUM TOP & BOTTOM BRACING The Precision Series used a multi-material hybridised structure. This design philosophy has been developed by Wilson Benesch over three-decades of loudspeaker enclosure design. By combining multiple-materials in this way the designer is essentially forming a composite structure that allows the unique properties of each material to be used to create a design advantage. This exact same hybridised design ethos is used in the reference line Geometry Series. The distinct Precision Series top and bottom 'caps', whilst elegant forms, are in fact critical components in the enclosure design. Precision CNC-machined from solid billets of aluminium, the caps lock in position the front and rear aluminum baffles with the wood side panels. The caps are then tied along the vertical axis of the Precision Series enclosure using aluminium alloy bars that brace the enclosure and compress the whole structure to ensure it is as sonically inert and stiff as possible. This tie and brace design is used across the Geometry Series and also within the Isobars of the R1 HIFI Rack. This construction technology is another example of trickle-down technologies taken directly from our reference line. LEONARDO TWEETER The Leonardo Tweeter has been developed directly through an iterative design approach that gave birth to the Fibonnaci and Semisphere Tweeters before it. Unlike these exotic wide-bandwidth designs, the Leonardo does not employ a hybridised Silk-Carbon dome and thus its frequency response is flat to 24 kHz. However the geometrically optimised and decoupled polymer-carbon fibre faceplate is taken directly from the same shelf as that used in the Eminence loudspeaker. This entirely proprietary component is manufactured in-house using the latest 3D printing technology. The faceplate acts as a waveguide to guarantee optimal dispersion and phase characteristics for the Leonardo Tweeter. Just like the Semisphere Tweeter, Leonardo features the proprietary Neodymium magnet ring in its rear chamber. This open architecture ensures optimal energy paths for both acoustic and thermal energy; critical design considerations where super low distortion levels are aspired to. TACTIC II DRIVE UNIT: Design Philosophy At the very core of the development of Wilson Benesch drive unit technology was the ethos that transient response time should be reduced as much as possible. That is to say the response of the drive unit to change from equilibrium or steady state. There are no delays in nature and yet when a dynamic drive unit attempts to reproduce a range of frequencies from a recording, the laws of physics dictate that the moving mass of the drive unit will always reproduce sound with some delay. This is an unavoidable design limitation of all dynamic drive unit designs today. However these physical laws can be observed and used as a guide to optimise the dynamic drive unit design. By introducing light and stiff materials to reduce mass, powerful rare-earth magnets to increase power and control, highly optimised structural design to maximise the unique properties of each material and form within the structure, the Tactic II drive unit is a near optimal dynamic drive unit design. Wilson Benesch has iteratively developed four drive unit designs. These have been referred to by the independent press as “lightning fast” and "one-third dynamic, two-thirds electrostatic". Testament to the design ethos at the core of these technological developments. TACTIC II DRIVE UNIT: Isotactic Polypropylene Arguably the most critical component in any dynamic drive unit design is the choice of material in the cone. Wilson Benesch was the first company in the world to develop a consumer product that used Isotactic Polypropylene. More than a decade on, this remains the material of choice in all our drive unit technologies. It's unique balance of high specific stiffness with exceptional damping provide what we regard as the optimum balance of material properties. Other hard dome technologies, including that using carbon fibre have been extensively tested. Without exception all these technologies result in the need to design complex crossovers to control unwanted resonances within the cone which arise from very high specific stiffness. This complexity within crossover design is regarded as a compromise. INTERNAL ENCLOSURE TIES & BRACES The hybridised Precision Series enclosure is further stiffened and damped using threaded steel bars. The bars terminate into threaded pockets on both the aluminium top and bottom caps, plus the front and rear aluminium baffles. The bars are then torqued to create a compressive force across the vertical axis of the Precision Series P1.0 enclosure. This design feature is used across our reference loudspeaker line and also within the Isobars of the R1 HIFI Rack. This construction technology is another example of trickle-down technologies taken directly from our reference line. INTERNAL DAMPING As the leader in loudspeaker enclosure design, Wilson Benesch incorporated into the design of the Precision Series numerous features that allow the enclosure to be stiffened and damped optimally. Another example of this is seen in the tubular structures that populate the internal enclosure to provide both increased stiffness but also damping of the Precision Series enclosure along its horizontal axis. P1.0 Specifications DRIVE TECHNOLOGY 1x 25mm (1”) WB Leonardo Tweeter 1x 170mm (7”) WB Tactic II Mid/Bass Drive Unit CROSSOVER TOPOLOGY Tweeter 2nd-Order Crossover Mid-Bass Directly Amplifier Coupled ENCLOSURE TECHNOLOGY Hybrid Composite Construction U-Section High Torsion Aluminium Alloy Damping Rods in the Horizontal Axis Tubular Cross Bracing Port Tuning Alloy Baffle, Top, Foot with Machined Logos Front & Rear MEASUREMENTS 2-way, floorstanding loudspeaker Impedance: 6Ω nominal / 4Ω Minimal Sensitivity: 89dB at 1 metre on-axis, 2.83V input Frequency response: 38Hz - 24kHz +/- 2dB on-axis DIMENSIONS Height: 322mm (12.6“) Cabinet // 1025mm (40.4") inc. Stand Width: 348mm (13.7”) Depth: 368mm (14.48”) Weight per Channel: 30kg (66 lbs) stand integrated

Further information: As New rare Sony DTC-2000ES DAT recorder in Perfect Condition. The unit was purchased as NOS from Russia hence the voltage is 220V-230V. The unit was used very carefully to record some rare recordings for digital converting and editing. The unit is then boxed up since. A rare find in as new condition. Beautiful copper chassis and wooden side panel.

Further information: Rare Nakamichi CR-7A 3 head cassette deck in Perfect Condition. The unit was a very hard to find to begin with and after purchase the unit is then sent to Tom van der Hoff in Maassluis the Netherlands to be fully check, test and re tuned last year March. He is one of the very well respected Nakamichi technician in the world. Receipt will be passed on to the buyer. The sticker at the back of the unit clearly dated the service. Please note that the unit is 120V. The unit is then used very carefully to extract some rare recordings for digital converting. The unit is then boxed up since. If you know Nakamichi then you know how good this unit is.

Item: Marten Duke 2 Bookshelf Speakers in Piano Black with Original Marten Stand Location: Melbourne Price: On Hold (Combo RRP is $14850) Item Condition: As new condition for both speakers and Stand. Comes with all original box, paper and accessories for the speakers. Unfortunately no box for the stands but will be well packed if needed. Reason for selling: Customer Upgrade Payment Method: Pickup - Cash, Paypal + fee or direct deposit Extra Info: Taken from Marten website: Duke 2 Stand up and be counted. Simply one of the world’s greatest stand speakers, Duke 2 is true to the spirit of Heritage. The classic design of its cabinet and controlled sound, make it the perfect start-up model for your high-end system. What you get Great things come in small(er) packages. The Duke is a 2-way system, comprising a newly developed 7″ ceramic bass/mid-range driver and a new tweeter, which uses pioneering technology to achieve diamond-like performance. A must for the true audiophile with a modest listening space. 2-way ported Mundorf enhanced crossover Accuton bass drivers Cell tweeters Features Greater than the sum of its parts Cell tweeter designed with the latest Accuton technology. Bass drivers with higher transparency and resolution using the latest Accuton technology. Improved crossover using leading Mundorf components. Internal wiring Premium cables for purer sound. We use Jorma Design internal wiring, for its exemplary quality and performance. Handmade in Sweden, the cables use separate + and – for enhanced shielding and the highest quality Copper. This offers natural, transparent sound; the perfect choice for our speakers. Cables are integral components, so they must work harmoniously with our precision design and build. Jorma Design delivers exactly what a Marten speaker demands. Your space Music as refined as your home. Music is your environment, as much as your sofa or the pictures on your wall: it enhances the space around you. The Heritage series fits seamlessly in to your home, giving you visual appeal as well as award-winning sound. Technical specifications Speaker (front) 1 x 7 ” Ceramic unit 1 x 1 ” Ceramic unit Frequency range 38-40 000 Hz ±3dB Power rating 150 W Sensitivity 88 dB/w/m Impedance 4 ohm (3.7 ohms min) Type 2-way ported (39 Hz) Crossover frequency Second order, 3000 Hz Components Low loss copper foil coils and silver/gold in oil capacitors Terminals Single-wiring WBT Internal wiring Jorma Design Cabinet 23mm veneered MDF Dimensions W x H x D 22 x 40 x 33 cm (8.6 x 15.7 x 12.9 ”) Net weight 13 kg (29 lbs)

Item: ATC SCM 19A FLOORSTANDING SPEAKERS in Cherry (Ex demo) Location: Melbourne Price: $5300 Item Condition: Ex demo speakers. Comes with all original paper and accessories, no box but will be well packed if delivery is needed. There is a dent on one of the speakers as pictured. Reason for selling: Rotate Stock Payment Method: Pickup - Cash, Paypal + fee or direct deposit Extra Info: SCM19A Overview New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide. “SL” spec bass driver with 75mm integral Soft Dome. 9kg optimised short-coil/long gap motor assembly. On-board grounded source 182 watt Class A/B Bi-amplifier. Active crossover filters and overload protection. 6 year warranty. Specifications: Drivers: HF ATC 25mm dual suspension Tweeter, Mid/LF ATC 150mm SL Matched Response: +/- 0.5dB Frequency Response (-6dB): 54Hz-22kHz Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical Max SPL: 108dB Crossover Frequency: 2.5kHz Connectors: Male XLR Input sensitivity: 1V Filters: 2nd Order critically damped with phase compensation Overload Protection: Active FET momentary gain reduction Fault Protection: DC fault protection and thermal trip. Fault indication on rear panel mounted LED Amplifier Output: 150W LF, 32W HF Dimensions (HxWxD): 980 x 370 x 344mm (inc. foot plinth & amp, spikes add 25mm to height, grill adds 34mm to depth) Weight: 31kg

Item: Chord Hugo 2 Transportable DAC/Headphone Amplifier Location: Melbourne Price: $2100 Item Condition: Used but in very good condition, there is a scratch mark on the black plastic underneath. Please check out the pic. It comes with all accessories and box including remote and basic cables. Reason for selling: Customer upgrade Payment Method: Pickup - Cash, Paypal, COD Only Extra Info: Photos:

Item: Isotek Power Conditioner Solus in Black Location: Melbourne Price: $850 Item Condition: Used but in perfect condition. Do not have original box but will be well packed if needed. Reason for selling: Customer Upgrade Payment Method: Pickup - Cash, Paypal + fee or direct deposit Extra Info: Photos: IsoTek’s most affordable rack-width component conditioner improves audio and audio-visual electronics whilst fitting neatly into a hi-fi rack. An award- winning, simple and effective way to upgrade the sound of your hi-fi. Please don't hesitate to contact your friendly staff at Audiotech for more information about this product. Features: Removes Common Mode and Differential Mode mains noise, RFI reduction 45dB, Independent outlets – no outlets are connected together, stopping Differential Mode cross-contamination, Unique Individual Differential Gate© filter network improves the isolation between each of the six outlets, further eliminating cross contamination, KERP© (Kirchoff'sEqualResistancePath) ensures equal resistance and equal power delivery across all outlets. No outlet gets power before the next, a common problem with other power products which daisy chain outlets together, 22,500A of instantaneous protection, featuring IsoTek's unique sequential protection system, Internal wiring; multi-strand silver platted OFC copper with PTFE dielectric, Maximum power, continuous 2,300W, Available in UK, EU, US, AU, CH and ZA sockets,

Item: Aria Piccolo Music Server 2TB + Sbooster Power Supply (Relist) Location: Melbourne Price: $1700 Item Condition: Used but in great condition with all original manual and packaging for both units. One of the best app to use for streaming which supports both iOS and Android. Payment Method: Direct Deposit, Cash or Paypal + charges. Extra Info: aria piccolo is compatible with AirPlay™ and DLNA™ and, like the original aria, supports extended metadata fields for all music genres and is fully automatic for populating a wealth of classical music detail. HD MUSIC SERVER EASY TO USE POWERFUL aria piccolo, is a ripper, streamer, multi-room player and DLNA server that has been designed for budget conscious users and sets a new reference in price/performance ratio for an all-in-one system. It incorporates a fanless design with ultra-low power consumption, so it can always be keep on and ready to play your favorite music. Features: Easy to use – just open your tablet and start playing music 100% silent operation Multizone support Fully automatic CD Ripper (insert & rip), with external DVD Best metadata retrieval in the market with auto access to 5 databases Bit Perfect digital audio Support for up to 32bit/384KHz PCM/DXD music files. 24bits-192KHz and DSD64 via SPDIF Digital (USB) Compatible with Airplay and DLNA Wifi 802.11.ac Supports storage expansion * through wifi connected network Supports a broad range of music formats: WAV, FLAC, Apple Lossless (ALAC), AIFF, AAC, Ogg Vorbis, MP3 and DSD256