Jump to content

Search the Community

Showing results for tags 'Tannoy'.

  • Search By Tags

    • Tannoy ×
    Type tags separated by commas.
  • Search By Author

Content Type



Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Found 25 results

  1. Mind blowing sound and a great investment. people will quibble over which is better gold lsu or hpds. I think they are just different. There is a priceless review on Audiogon, I think, where a long time LSU golds owner compares the 2 and decides, no the hpds are good but the LSUs just co...
  2. Tannoy DC-100 speakers and stands Complete with stands 1986 ish Good condition throughout Rubber around cones has discoloured not sticky, dry or damaged Great example of this iconic speaker Pick up or view in Rye 3941 Specifications Type: 2 way, 2 driv...
  3. Further Information: Immaculate example of Tannoy Arden Mk1's with Alnico goodness. These have had the surrounds replaced to original spec and crossovers upgraded with Jantzen caps, both by @Lx4man From what I hear you'd be hard pressed to find a better presenting example....
  4. Speakers were purchased new, and are in excellent condition. There is one mark on on the rear corner of one of the units that seems to be where the veneer has rubbed off however would be easy to correct if desired (see photo - the mark is only on the corner). These are a great sounding s...
  5. Further Information: Tannoy Fusion2 speakers, excellent condition. ● One 1" Nitro-urethane Layer-dampened Woven Polyester Dome Tweeter, One 6.5" Paper Cone Woofer ● Reflex Design ● Crossover: 4th order acoustic Linkwitz-Riley, at 2.8 kHz ● Recommended Power: 10-...
  6. Further information: A pair of original Tannoy crossovers for HPD315, 12" DC drivers, in original condition, suitable for Cheviot/Devon cabinets. These could be esily modded to work with HPD385, 15" DC drivers which would suit Berkeley and Arden cabinets as well. Will answer a...
  7. These 10" Tannoy speakers came out of a set on vintage Eaton bookself/standmount speakers with a volume of 30L - I don't have the cabinets but do have the original grills and badges. I'm looking get some cabinets made and maybe go bigger to try and get some more bass out of them. Maybe a folded hor...
  8. Some time ago, following a renovation here at home, I sold my Tannoy Revolution Signature DC6T tower speakers. At the time I bought them, my Dad also bought a set. Dad (now 86 years old) is relocating to a retirement home, and the Tannoys are not suited to his new environment. So here's a great chan...
  9. Further information: Driver complement: One 1″/10″ coaxial tweeter/woofer, one 10″ woofer Frequency range: 30Hz–35kHz (-6dB) Sensitivity: 92dB (2.83V/1m) Power handling: 30–250 watts Nominal Impedance: 8 ohms Dimensions: 17.125″ x 45.5″ x 12.625″ (without spikes) Weight: 94...
  10. Some time ago, following a renovation here at home, I sold my Tannoy Revolution Signature DC6T tower speakers. At the time I bought them, my Dad also bought a set. Dad (now 86 years old) is relocating to a retirement home, and the Tannoys are not suited to his new environment. So here's a great chan...
  11. Further information: Few minor blemishes on the cabinet only noticeable on closer inspection. Original jumper included not in photos. No box so prefer a local buyer. Photos: PLEASE READ If you include any reference to pricing whatsoever in this section (e...
  12. Further information: SPECS & PRICING Driver complement: One 1″/10″ coaxial tweeter/woofer, one 10″ woofer Frequency range: 30Hz–35kHz (-6dB) Sensitivity: 92dB (2.83V/1m) Power handling: 30–250 watts Nominal Impedance: 8 ohms Dimensions: 17.125″ x 45.5″ x 12.625″ (without spikes)...
  13. Looking at picking up an old pair of Leak speakers which are 15 ohms. The three spare amps that I have ( which are all 8 Ohms ) are Quad 303, Quad 405 and an Earl Watson Trinity valve @11 Wpc. i know the power output is halved when a 15ohm speaker is powered by 8ohm output, so which would...
  14. Zu Audio speakers have often been of interest to me. I'm curious about the immersive open sound they reputedly have but wonder if it comes at the expense of other parts of the sound, mid range tone for example or just too in your face. Are there any SNA'ers who can tell me of their experience o...
  15. Item: Tannoy Revolution R2 Floorstander Speakers (Made in Europe) Location: Sydney Eastern Suburbs Price: $450 neg. Item Condition: Very good cosmetic condition (a few scuffs on corners of cabinet, some uneven colouring from position of speaker grilles). Function perfectly. Speaker grille c...
  16. The April 2013 meeting of the Sydney Audio Club sees us once again at Dence Park for an afternoon of fine music and sound and convivial company. Each month, the Sydney Audio Club presents the finest in high end audio systems for our members and guests. It's a bit like a private audio show once a m...
  17. Hi, I am looking to buy a second hand pair of PMC DB1i or Tannoy DC 6 Revolution bookshelf speakers for my smaller listening room. I might also consider ATC scm 7,Amphion Ion or Proac Tablette ref 8. I also like the Audio Physic Yarra 2 Evolution, its a nice slim two way floor stander. Must be i...
  18. Hi, I've have had my Cheviots for about 8 or so years. In this time I've had some nice speakers in my system but I always come back to the Cheviots for the music they produce. My Cheviots with the HPD315 drivers have finally succumbed to the inevitable and now the foam surround needs replacing. I'...
  19. I was at the home of one of my daughter's friends for a BBQ. There were some large speaker cabinets with some nice sounds coming out of them. They were playing music from an iPad connected to an unknown (to me) valve amp. It turned out they were Tannoy's that came from his Grandfather's house. T...
  20. Hi, has anyone heard of this line of Tannoys? As far as I can tell, they're from the early 80s, and that's it... There's a pair of Tannoy Bradley's (12" of the line up) on eBay and was wondering whether they're worth pulling the trigger. They have 3128 drivers – are these any good? Can I assume...
  21. Hi all, I thought it about time to share my humble little setup since she's finally up and running. I've been grinning ear to ear all arvo just listening to the FM bandwidth and a couple of Lps. This is the first money I've spent on Audio since the $40 I shelled out on a Sansui 331, rubbish Onkyo...
  22. I'm looking to buy a pair of Vintage British speakers to use with my 2 channel vintage Stereo setup. My main interest is in 3 way type medium/large sized speaker's configuration, 80-100cm high, minimum 8 inch diameter woofers. The following is a list of models/brands I'm particularly interested...
  23. Item: Leak Stereo 20 valve amp Location: Coburg Victoria Price: PRICE DROP $950 $899 $850 ono Donation to SNA on sale Item Condition: Used Reason for selling: not getting enough use Payment Method: Pickup - Cash, DD, COD Extra Info: I would much prefer to sell this locally but if there's no local in...
  24. Hi all im new here and a big hifi fan, Im very excited to be starting my new Project a set of Tannoy westminster se cabinets. It is a big project and its a first for me as ive never built anything like this before but its a challenge. Unfortunately because the specs use different sized timber i h...
  25. Hey SNA! Had to dump my Ushers- just not enough bite. Discovered that although it had a claimed sensitivity of 87db, Australian HiFi tested it at a very average 83db! My poor Yamaha P2075 really couldn't get the best out of it! So, me being the "genius" that I am, I realised that my Denon PR...

×
×
  • Create New...
To Top