Nic H Posted June 4, 2023 Posted June 4, 2023 (edited) Icon Ps1.2 mm/mc phono pre amp Purchased 2 months ago from Groove audio in Melbourne. In perfect working order, Original packaging Warranty Current model Rrp $3100 Original power cables (not mine) Going a different direction, very happy with the sound. Pick up or view in Rye 3941 Will post at buyers expense auspost. Specifications and Features • Built in volume control, will drive most power amps • Stereo/mono switch for better S/N and distortion from mono and worn stereo records • Choke regulated power supply • Separate Power supply for lower noise • Comprehensive manual supplied • All hand wired point to point • No printed circuit board to ‘colour’ sound • Japanese Blue ALPS volume pot. • All Triode valves • 2x ECC83 1x ECC81 • Sensitivity: 3mv for 1.26v output (0.3mv MC) • Gain MM 53db MC 72db • Load: imp: 47k MM, 100 ohms MC • Source impedance 50 ohms • Signal to noise level -75db (MM unweighted) • RIAA Freq response 20hz-20khz 0 – 1db • NO feedback used, Passive RIAA • High quality 2w metal film, & wire-wound resistors • Blue LED mains indicator • Polypropylene audio capacitors • Silver PTFE audio cable • DC supply for valve heaters • Heater circuit floated to minimise heater-cathode noise • Polished stainless steel chassis • 6mm solid alloy front & rear plates • Gold plated Input terminals • 230/240volts (also 120v), 50watts 1.0A anti-surge fuse • Dimensions 88mmW, 310mmD (350), 134mmH , 3kg Pre-amp (figures in brackets allow for rear connections) 165mmD, 82mmW 80mmH 4kg PSU • Shipping size/weight 42cm x 38cm x 30cm 9.6kg • C E certified. Conforms to ROHS and WEEE Edited June 17, 2023 by Nic H
Recommended Posts