Ronny Felix Posted January 2 Posted January 2 Hi everyone, This week I started the calibration for DIRAC on my NAD T758V3i receiver. The stereo listening sounds much better with Dirac on. But I use the receiver also for about 50% for surround between the NAD software and DIRAC. And there starts my problem. 1. When I switch the receiver on and I want to listen in stereo with DIRAC, I have to change the speaker configuration each time (delete the middle and surround speakers because of the DIRAC configuration). This is annoying - switching on each time tv and OSD... 2. I also configured DIRAC for surround but when I send it to the NAD, it seems to overwrite the previous configuration. So it doesn't accept 3 configurations as specified in DIRAC. As I am just starting with DIRAC, I am a newbie on this matter and new ideas or solutions are always welcome!
Guest Posted January 2 Posted January 2 9 hours ago, Ronny Felix said: 2. I also configured DIRAC for surround but when I send it to the NAD, it seems to overwrite the previous configuration. So it doesn't accept 3 configurations as specified in DIRAC. When you reach this step, you need to select one of profiles, give it a name and export.
Ronny Felix Posted January 2 Author Posted January 2 41 minutes ago, Snoopy8 said: select one of profiles, give I did select the second slot (I used the first slot for my previously exported stereo configuration) named it and exported it. But when I want to use it on the Nad, the 1st one had disappeared...
Guest Posted January 2 Posted January 2 (edited) 7 minutes ago, Ronny Felix said: I did select the second slot (I used the first slot for my previously exported stereo configuration) named it and exported it. But when I want to use it on the Nad, the 1st one had disappeared... Maybe your unit is faulty? Suggest contacting NAD and your retailer. *** And try factory reset ? Edited January 2 by Snoopy8 Added **
Ronny Felix Posted January 2 Author Posted January 2 I think it is caused by a wrong configuration on the NAD. I read about the presets on the NAD. This could be the source of the problem. I will look further into it. But thanks for your reply Snoop!
Hi-Fi Whipped Posted January 2 Posted January 2 Sounds like you are loading two speaker configurations (stereo and surround) one after the other, yes this will overwrite the first. the 3 curve slots are for eq of the current speaker configuration only, you can’t load two configurations at the same time. Try loading the surround Dirac and choose stereo listening within the nad settings to give you 2ch.
Ronny Felix Posted January 2 Author Posted January 2 Yes so far I came to the same conclusion. But I want to look further into this issue and see whether I can have the two configurations without exporting the other file when I want to use dirac with surround.
Hi-Fi Whipped Posted January 3 Posted January 3 When I had my T758v3i I used this app, gave me access to some setup tweaking and a quick and easy Dirac preset switching that I couldn’t find using the nad equivalents. https://apps.apple.com/au/app/nad-osd/id1326481910
Ronny Felix Posted January 3 Author Posted January 3 I know but then I should replace my Android smartphone
Hi-Fi Whipped Posted January 3 Posted January 3 2 hours ago, Ronny Felix said: I know but then I should replace my Android smartphone Maybe not, this looks similar, maybe worth exploring the options. https://play.google.com/store/apps/details?id=me.mrooding.t758&hl=en_AU
Ronny Felix Posted January 3 Author Posted January 3 That is new! I 'll check this out. Thanks for the info.
Ronny Felix Posted January 3 Author Posted January 3 This app is only available for older versions of Android. Furthermore it is not promoted by NAD. I will have to look elsewhere...
Hi-Fi Whipped Posted January 3 Posted January 3 9 hours ago, Ronny Felix said: This app is only available for older versions of Android. Furthermore it is not promoted by NAD. I will have to look elsewhere... That’s a shame, yeh the nad version is shite, third party app was much better, anyway it’s a nice to have not a necessity.
Recommended Posts