Redline is derived from Vertere's Pulse-R interconnect cable range. Furthermore, it follows the same design principles preserving the essence of the analogue audio signal.

Redline cable is double shielded with seven independent conductors per channel facilitating different configurations to ensure optimum musical performance, clarity and life-like dynamics for both tonearm and stereo interconnect cables. The six (two thin and four thick) signal conductors are silver plated. The thicker dedicated ground conductor is tin-plated.

Furthermore, the Redline stereo Analogue Interconnect Cable is internally configured differently to the tonearm cable to suit both line level and pre-out signals.

The Analogue cable is connected in a quasi-balanced configuration to suit the dynamic, complex and wideband audio signal conducted from source to amplifier or pre-amplifier to power amplifier with clarity and superb low-level detail. Whereas, the Tonearm cable is wired in a fully balanced manner to suit the low output of cartridges and their balanced design.

Redline analogue cable connectors are all bespoke, and all contacts are gold plated with triple the standard gold plating thickness. Termination options include RCA, DIN, XLR, Tonearm DIN, Mains, Spades and 4mm plugs.

Read Our Vertere Redline Review

Redline Speaker Cable

The XminiS Speaker Cable utilises multiple conductors to provide enhanced signal transmission. With both signal conductor set being identical and shielded, it can be configured for ‘balanced’ or ‘single’ ended use depending on shield management and shield connection to bring optimum performance for both traditional and bridged amplifiers.

Redline Tonearm Cable

The Redline Analogue Tonearm Cable (£595) enables the miniature cartridge generator to drive the phono input comfortably and clearly. The internal conductor configuration of the Redline tonearm cable is optimised for conducting the delicate phono signal with its substantial RIAA equalisation.

Redline Interconnect

Redline stereo Analogue Interconnect Cable (£595) is internally configured differently to the tonearm cable to suit both line level and pre-out signals. Vertere says that dynamic, complex and wideband audio signals are conducted from source to amplifier with clarity and superb low-level detail.

Combined with the Redline Mains Cable, you have a complete cable solution that will work with almost any hi-fi system.

Redline Mains Cable

Based on the Pulse-HB Mains Power Cable (£595), the Redline utilises Vertere's proprietary multi-conductor construction for both live and neutral conductors. These are individually double shielded with an additional overall shield covering Live, Neutral and Earth conductors to further enhance performance. From milliamps to 15 amps, this extraordinary mains power cable ensures optimum performance from almost any hi-fi equipment.

Price and availability

The Vertere Acoustics Redline range is available now.

Redline cables are priced at £595 (€700/$795) for a 1m interconnect cable or a 3m pair of loudspeaker cables. Longer lengths per 0.5m are £130 (€160/$195).

Redline mains cables are £595 (€720/$895).

For more information, check out Vertere Acoustics. Also, we have plenty more photos in the gallery.

Tech spec

Redline Analogue Tonearm Cable

• Cable Type: 7 x Conductors, Vertere Pulse Multi Type (3 x Ground, 2 x Signal [Hot], 2 x Signal [Return])
• Termination: 5pin 90°, RCA, XLR (with Ground Wire)
• Length: 1.15m – Additional lengths in 0.5m steps
• Cable Diameter: 4.8 x 10mm

Redline Mains Power Cable

• Cable Type: 19 x Conductors, Vertere Pulse Multi Type (1 x Ground, 9 x Live 9 x Neutral)
• Termination: UK, EU, US, AUS, IEC
• Length: 2.00m – Additional lengths in 0.5m steps
• Cable Diameter: 11.8mm

Redline Analogue Interconnect Cable

• Cable Type: 7 x Conductors, Vertere Pulse Multi Type (1 x Ground, 3 x Signal [Hot], 3 x Signal [Return])
• Termination: RCA and XLR
• Length: 1.00m – Additional lengths in 0.5m steps
• Cable Diameter: 4.8mm (each)